u/futureconstruct

28 results (0.01 seconds)

This was mounted to the table at an estate sale, any idea what it was used for?

Apr 2025 ⋅ ⋅

This is a power supply with micro-usb but output says 9v, and when I measured it it's actually 10v. Wouldn't this damage any other electronics you plug in expecting it's the common 5v? I feel this shouldn't exist. I haven't seen anything other than 5v micro until now. For a cordless Bauer tool.

⋅

Is there a home use for these Hexane ampules? They came in one of the first aid or spill kits I bought from a company that went bust (I bought other items, these were in the same lot) and I don't know what to do with them. TIA!

⋅ ⋅ #I-bought-other-items,-these-were-in-the-same-lot #these-were-in-the-same-lot #I-bought-other-items

Wet PETG on the left side (about 60 to 70% humidity in the room) and dry filament on the right. I aborted the print and dried the filament for about 6 hours at 130 deg F in a makeshift food dehydrator, then restarted the print and the results are evident.

⋅

Has anyone figured out how to repair broken plastic latches on boxes? This handy tool set has lived in my truck and has served me well for 10 years, and would like to fix it if possible. Saw a couple of vids where people install metal latches, I'll go with that if there's nothing better. TIA

⋅

Do you think this inverter is pure sine? I saved it from trash, want to use it as inverter in my van for camping if needed (I have aux batteries, separate from car battery system) I'm thinking this should be a quality inverter since it was meant for computers. I don't have a oscilloscope. TIA!

⋅ ⋅ #I-have-aux-batteries,-separate-from-car-battery-system #separate-from-car-battery-system #I-have-aux-batteries

Is there any use for these older digital cameras? I saw some videos where people make them into a night vision camera, but I can't say I need one. Is there some part that should be saved from them? I'll donate them otherwise. TIA!

⋅

Where can I find enthusiastic, cheering sports crowds? I will host someone visiting SoCal and they're into many sports (I'm not really) so one of the days I'd like to take them to an event (free or paid, college, etc.) as long as it's lively. Any ideas? TIA!

⋅

Anyone else likes to see every shot? Do you just use your phone's front camera? I'm thinking of mounting this with a magnet or something, that would be convenient.

⋅

Slicer feature would allow faster printing while keeping detail. Outer wall would be printed first to avoid nozzle interference. My last post was explained in a different way, so I'm making this one as an alternate explanation.

⋅

1/2 inch long conical piece of metal, top is marked 1/4 and measures 1/4 inch, feels like lead

⋅

Clear strip of plastic 6 inches long by 0.75 in wide, 3 metal strips sandwiched inside and come out to a small electronics connector, glued onto a flat bar piece of metal

⋅

Round piece of concave/convex metal about 1/4 inch diameter with a punched out center (weird shape)

⋅ ⋅ #weird-shape

Which tool box should I keep? 41 Husky vs 41 Craftsman. I have both but don't have that many tools, and need the space. I'm a garage diy-er. Craftsman seems slightly better built, my Husky is newer. I love them both and can't decide. The stainless one is slightly more valuable. Thanks in advance!

⋅

Is there a straight line seam tool available in Prusaslicer (or any other slicer?) Because I can't paint a perfectly straight line freehand with a mouse and makes post processing removal harder.

⋅

What color drawer liner do you prefer and/or is there one you'd avoid? I'm aiming for best contrast to see the tools. This is not necessarily machinist specific (I will ask mechanics too) just in general I'm looking for opinions. So far I'm leaning toward the brown from Kennedy toolboxes. Ty

⋅ ⋅ #I-will-ask-mechanics-too

Where can I call around to sell a [almost full] 55 gallon drum of hydraulic oil? It includes a drum dolly (picture for reference.) My dad got it from a machine shop going out of business and I have to move it ASAP. I'm in S. California. Any ideas welcome. TIA!!

⋅ ⋅ #almost-full

Fast print and good detail possible in the slicer? Print the outer layer of the slice at half the height, but print it twice; this way we get the detail in the outer layer only where it matters. So a print at 0.24mm will do the outer wall at 0.12 height and print twice to equal the rest.

⋅

I have a spare board for my Ender 3, can I just insert it in a Tevo Tornado? I would just let my slicer know I have a Ender 3 with a custom bed size, would that work? (trying to avoid flashing software, found a Tornado for sale with a bad board)

⋅ ⋅ #trying-to-avoid-flashing-software,-found-a-Tornado-for-sale-with-a-bad-board #found-a-Tornado-for-sale-with-a-bad-board #trying-to-avoid-flashing-software

Some images or videos are hidden because they can no longer be found or have been removed by the file host ()