5 images
6 images
16 images
20 images
7 images
5 images
2 images
5 images
9 images
Quite noticeably different in size.
This photo is a bit deceptive.
Stock 519a 4500k for the M150 and 519a 5700k dedomed for the M200
Left M150 and right M200. This is wb locked but is meant more to show the tighter beam on the M200's bigger reflector.
M150 519a 4500k sign down there is about 100m.
M200 519a 5700k dedomed. Now this isn't perfect since I gained a little throw dedoming. It is still very apparent the extra throw gained for the reflector size.
Acebeam P16 for reference and because it's my post, I'll post what I want. lol
More beamz! Just saying I love my P16.
2 images
9 images
5 images
2 images
3 images
4 images
2 images
6 images
4 images
5 images
To make the T3 driver work in S2+ i had to enlage the inner diameter of the retaining ring and solder a longer brass post to + terminal
Both runtime tests where performed with the same keeppower 1200mah 18350 charged to 4,2V. Stepdown happens at 3V with both drivers. I used modes that measured the same output...
...on my uncalibrated cardboard box. So exact lumens are not correct, but runtime comparison should be quite fair. Around 20 mins more for the buck driver of the T3 is nice to have
Left: S2+ 519a 4500K DD 10deg TIR Right: Fw3x 219B 3000K Triple TIR
3 images
2 images
