Master No. 230 garage sale find (no key) - Picked, gutted, cleaned, and reassembled. Assembling without a key is by far the hardest challenge I've given myself...more so than any security pin encountered thus far.8yr ⋅ M3talhead ⋅ r/lockpicking
Identical UJSSM batches, same f.g. (1.000) Why is one clouded then the other? First thought was suspended yeast after transfer, but both were slow racked at the same time after several days of clarification with temps in the 40s-50s.10yr ⋅ M3talhead ⋅ r/firewater
Updated fermentation tower. Had to pull the airlock of the top tower since it was higher o.g. and starting to blow off but all three are chugging along quite happily now.10yr ⋅ M3talhead ⋅ r/firewater
Here are my (limited) options for feed at my local TSC. Which has the best potential for the most complex/flavorful whiskey?10yr ⋅ M3talhead ⋅ r/firewater
I made a deck box using treated pine, followed by a 220 sanding and Minwax pecan poly-stain. Everything was going smoothly until half of the boards started turning green as I was applying. Will it fade away or am I hosed?8yr ⋅ M3talhead ⋅ r/woodworking
Looking for a simple, keg-friendly pot still head that doesn't cost >$100 and saw this on Artisan Distillers. Any downsides apart from the standard reflux/NGS arguments?10yr ⋅ M3talhead ⋅ r/firewater
How good of a deal is this for corny kegs? I am currently setup for sanke but if may consider switching if the pros outweigh the cons.9yr ⋅ M3talhead ⋅ r/Homebrewing
