Finally got camper tied down, was wondering if there was rules or safety tips while driving I should always be following, this is my first Time with a camper so far I’ve just been taking the turns slow!4yr ⋅ Coolfry ⋅ r/TruckCampers
Just bought a 1986 300zx manual NA for $200. Guy said the timing was off so I got the belt off, kind of lost now youtube doesn’t have many results. Just want to get it running5yr ⋅ Coolfry ⋅ r/MechanicAdvice
1986 z31 300ZX headlights haven’t popped up since I got it, anybody have this issue and found a solution?5yr ⋅ Coolfry ⋅ r/MechanicAdvice
Planning a move to Salt Lake City, Utah from San Diego, California. 750 miles. I want to tow behind me my car and motorcycle on a trailer. Is there any advice I could get for this so I can get there safely? First long trip with camper. More details in comments.3yr ⋅ Coolfry ⋅ r/TruckCampers
1986 Bronco - I am experiencing “death wobble” at 30-40mph after alignment yesturday. have recently replaced everything in the steering and suspension, had most of it welded on along with the nuts and bolts. What else do I check?3yr ⋅ Coolfry ⋅ r/MechanicAdvice
Please someone help me... 1993 Ford F-350 I’ve been driving for 5 hours away from home My truck lost power but would still rev, pull over and this shot out tons of smoke smelled like a bbq out the bellhousing ... I just put a new radiator in and temp gage read normal. Did my rear main seal blow out4yr ⋅ Coolfry ⋅ r/MechanicAdvice
2001 7.3 powerstroke e450, was wondering if it’s supposed to be really slow?6mo ⋅ Coolfry ⋅ r/skoolies
Could really use some suggestions on tires, looking for 40s and above for my 93 f3505yr ⋅ Coolfry ⋅ r/4x4
1986 Nissan 300zx missing some fuses I believe one is the engine control where do I get replacements? Also wondering why previous owner would remove them..5yr ⋅ Coolfry ⋅ r/MechanicAdvice
Can I delete everything on the plenum on a z32 and adjust the throttle bodies open a little like how it’s done on a z31?1yr ⋅ Coolfry ⋅ r/300zx
So only this much of my dash wants to turn on on my 86, is this caused by power supply? The 2 gages in the center of car turns on too4yr ⋅ Coolfry ⋅ r/300zx
1993 Ford F-350 XLT - how can I modify my truck to make it it's best self?7yr ⋅ Coolfry ⋅ r/MechanicAdvice
Dropped 3.3 in, anywhere I can find guide or something like that to hook everything back up? Can’t seem to find anything useful4yr ⋅ Coolfry ⋅ r/300zx
So I have a mini Chopper with a 49cc and I believe 2 or 3 speed transmission. I never got motor to run properly and I have a 212 predator from harbor freight. Can I use the transmission on that motor?2yr ⋅ Coolfry ⋅ r/minibikes
Could really use some direction on my brake light wiring, or atleast what kind of shop to look for to have someone do it correctly for me without costing more than the camper. I just don’t want to fry anything3yr ⋅ Coolfry ⋅ r/TruckCampers
1986 ford bronco 5.0 - randomly died when driving home last night , now it cranks but won’t start up. Gauge shows gas in tank, I don’t hear fuel pump come on2yr ⋅ Coolfry ⋅ r/MechanicAdvice
Swapping 3.3 into 86.. everything I’m reading is saying I need to make some modification to make the 3.0 pan fit with the oil pickup tube, can I just use the 3.3 pan?4yr ⋅ Coolfry ⋅ r/300zx
What would it take to make a 6 door bronco? I have a full size 1993 xlt f350, is it gonna be as easy as finding a bronco, another set of doors, putting it together and putting it on the frame? Is there anything out there about a build like this4yr ⋅ Coolfry ⋅ r/FordBronco
1990 NA failed NOX by a lot, was wondering anyone had this issue. Smoke tested at shop with no leaks. It sounds like a small exhaust leak, was thinking possibly egr tube cracked? This is after replacing valve cover gaskets3yr ⋅ Coolfry ⋅ r/300zx
Just picked up this rats nest of a turbo z yesturday, wondering if the adjustable shock option is transferable over to my NA GLL?4yr ⋅ Coolfry ⋅ r/300zx
Swapping my o2 sensor on my 86 NA. Was wondering how I can tell this is the right one for sure? I can see that the 86 uses Titania opposed to the rest of the years. New on left3yr ⋅ Coolfry ⋅ r/300zx
Swapping out hoses that have become hardened on z32, these were inside the breather hose I think. Do I need to put these in the new hoses? Never seen them before3yr ⋅ Coolfry ⋅ r/300zx
1993 f350 Transmission pan gasket was just replaced now it has a very slow drip from this corner. Everything is torqued to spec, the one with the drip I rethreaded and put new bolt because mobile mechanic stripped it (he’s not coming back). what do?3yr ⋅ Coolfry ⋅ r/MechanicAdvice
Anyone have tips for dropping engine into z31? Can’t get it to match up with transmission is there a special technique I’m missing it’s my first time feels like engine wont go far enough back into the trans4yr ⋅ Coolfry ⋅ r/300zx
Just bought this 1986 Nissan 300zx 3.0l NA 108k miles for $200!! Everything’s really nice but the engine. Hooked a battery up and got it on, but engine doesn’t start - would love some insight5yr ⋅ Coolfry ⋅ r/projectcar
Got a verification code text at 4am now my email and password are changed. How can I see what the name email is now? The hidden email they show is not mine3yr ⋅ Coolfry ⋅ r/facebook
Trying to drop engine into 1986 Nissan 300zx manual , I’ve been wiggling around trying different angles for hours is there any tricks to get the spline to match up to get the block to mate with transmission. Trans is on a jack underneath to adjust4yr ⋅ Coolfry ⋅ r/MechanicAdvice
Taking my truck (1993 Ford F-350) in for its first professional inspection tomorrow. This is the list the mechanic gave me of what he’s going to go over. Is there anything else that should be looked at?6yr ⋅ Coolfry ⋅ r/MechanicAdvice
Dash keeps coming on and off very sensitive to position of power supply.. wasn’t working when I bolted it in but when hold it certain ways dangling it works.. this is after soldering joints on it. What’s goin on?4yr ⋅ Coolfry ⋅ r/300zx
Swapped over the good fenders and bumper from my 84 parts car to 87 project that came with none, you can see small dent in hood it goes over like this a tiny bit on both sides. Is it an issue with the hood or does it all not transfer 100%4yr ⋅ Coolfry ⋅ r/300zx
Just picked up my first mini chopper, 125cc. a lot of the wires seem cut up, and it didn’t come with a carb/intake it seems like. Also he said it needs a cdi box. Any recommendations ? Thanks!!!3yr ⋅ Coolfry ⋅ r/minibikes
Just joined r/truckcampers with my 93 f350, this is my first camper and I’m wondering if anyone could explain how to put these camper tie downs on? I can’t tell if they are for frame or bed they just came in the camper. Thanks!4yr ⋅ Coolfry ⋅ r/TruckCampers
1986 bronco 5.0 - can anyone identify where the farthest right hose is going into? The hose was coming from the intake and went to nothing, so I removed the shown plug and put the hose there(revs went up when I pulled plug off then back to normal with hose).4yr ⋅ Coolfry ⋅ r/FordBronco
Just got these new style injectors. Has anyone ever had ones like this? The filter looks to be in the wrong place and the lower o ring is a little further down. I’m about to return but was just curious what this injector goes to3yr ⋅ Coolfry ⋅ r/300zx
Was finishing up my route for the night, drove down one last alley that looked like there was a hoarder on the map, got lucky and found 10 scooters lined up outside. I assume they became uncapturable by the hoarder and so they put them out, seems like bird might be solving the issue6yr ⋅ Coolfry ⋅ r/birdcharger
86 NA z31 will not stop leaking water out the back of engine. I cannot see any leaks anywhere just puddles of water under the air intake. It is a steady stream until the water runs out4yr ⋅ Coolfry ⋅ r/300zx
Wires on starter motor are cut, should I try to splice new wires on to these and then to the relay? Or is there a better way3yr ⋅ Coolfry ⋅ r/minibikes
1986 300zx got it to crank for first time since I bought it, it felt like the engine turned over and hit a stop and shut off. I just did the timing. Is it possible my upper 2 cogwheels there are off by 360 degrees? Extremely excited but also worried I broke something 👍🏼5yr ⋅ Coolfry ⋅ r/MechanicAdvice
1993 Ford F-350 fuel gage always reads past full on front tank, reads normally on rear tank7yr ⋅ Coolfry ⋅ r/MechanicAdvice
1993 Ford F-350 7.5l - my transmission dipstick was reading way over filled and I had a very bad leak so I started pumping fluid out, but my dipstick still reads over full? I don’t understand how I’m supposed to get an accurate reading. I measured at warm idle. This is all I could get out4yr ⋅ Coolfry ⋅ r/MechanicAdvice
Friend was pretending to lift my truck and dented the metal on the door in. It made an audible popping noise. Removed inside of door cover but there is another layer of metal preventing access. How can I pop it out( 93 Ford F-350)5yr ⋅ Coolfry ⋅ r/Autobody
Can a small exhaust leak cause these NOX Numbers? Increasing with speed?3yr ⋅ Coolfry ⋅ r/MechanicAdvice
Nissan 3.3l there’s a small little crack opened at the back of the head , does this matter the cam is right under4yr ⋅ Coolfry ⋅ r/MechanicAdvice
Could someone please check their bullnose and tell me what’s connected to these holes? My bronco came with no bumper, I see 3 places it could possible bolt up and want to know what the other holes are for3yr ⋅ Coolfry ⋅ r/BullnoseFord
Experimenting tonight for you guys... 40 birds all captured, seeing if the no limit rule really isn’t enforced6yr ⋅ Coolfry ⋅ r/birdcharger
Clutch pedal stays down no pressure at all, pretty sure my friend undid something when we were gonna drop trans but didn’t end up doing so - how can I make the clutch go back to normal on my own? I went to bleed clutch slave cylinder and no bubbles come out just liquid4yr ⋅ Coolfry ⋅ r/300zx
1986 300zx manual, what is this? Found it under my bellhousing after I was doing some transmission work4yr ⋅ Coolfry ⋅ r/MechanicAdvice
Want to buy this c3 corvette from mechanic that lives down the street. Don’t want to be intrusive! Details in comments6yr ⋅ Coolfry ⋅ r/MechanicAdvice
1993 f350 just drove 30 miles then saw this is disconnected after a 3 inch body lift. What is it?5yr ⋅ Coolfry ⋅ r/MechanicAdvice
