New vinyl cat stickers that I made with my beloved (second hand) Cameo 3! I am the third owner and I love my machine so much <31yr ⋅ nightscapesleep ⋅ r/silhouettecutters
The puff vinyl says women's rights will never be abused nor neglected. In support of those who are still suffer from manacles of oppressions in the rest of the world.1yr ⋅ cocochanoon ⋅ r/silhouettecutters
Some of my first successes doing multi-colored drawings with the cameo.2yr ⋅ Melancholy_Detail ⋅ r/silhouettecutters
First thing I did after I opened my cameo 4 and it’s safe to say I will suffer the noise for it actually working 🥲 thank you all for being here to help!3yr ⋅ lahhwow ⋅ r/silhouettecutters
Finally getting away from Cricut! Upgraded from my air 2 to the Cameo 4!3yr ⋅ carter31119311 ⋅ r/silhouettecutters
Let’s make a list of pens, pencils, etc...that DO and DO NOT work in the Pen Holders (either bought or 3D printed)!3yr ⋅ Olramllits ⋅ r/silhouettecutters
Y’all! I read on here somewhere to wash your mat and they will become sticky again. Dish soap and hot water! This was my worst mat and it is fairly close to new! Warning: after a few hours of drying it still wasn’t sticky. This morning though, stick city! I just let mine air dry in my dish rack.3yr ⋅ MiscLisa ⋅ r/silhouettecutters
I make science and plant based stickers and 100% think silhouette over cricut 😤 also always looking for crafter friends :)3yr ⋅ notawizscientist ⋅ r/silhouettecutters
I’m back with one more vinyl sticker post — I bought some metallic vinyl today and decided to go for an intricate two-tone Stormtrooper design. Really impressed with how shiny the material is! Dare I say this is as addictive as 3D Printing?3yr ⋅ otto454z ⋅ r/silhouettecutters
Just want some feedback on this design, positive or negative.3yr ⋅ Smoky-Designs ⋅ r/silhouettecutters
A new label for the gym bag. I think I need to check font spacing so I can make it clear it's choices not chokes3yr ⋅ larplabs ⋅ r/silhouettecutters
I’ve had my cameo for months and finally designed and made my first project 😍3yr ⋅ _HelloHailey ⋅ r/silhouettecutters
Finally took a picture of the finished lamp! Sorry it's not very clear. If you want to make one the files are free, and you can download them from my last post. Hope you enjoy it!2yr ⋅ eatwafflesbehappy ⋅ r/silhouettecutters
Christmas gift I made for a friend. He loves Joe Exotic and Jurassic Park.3yr ⋅ anonymous2278 ⋅ r/silhouettecutters
I designed and cut this stencil with my silhouette cameo 4. It's the first time doing something like this, it worked out perfectly!!4yr ⋅ skaletons ⋅ r/silhouettecutters
Bought as a gift for wife’s birthday today. I surprisingly love it so much. First project: dialling in chrome cast remote skin.3yr ⋅ BrahCJ ⋅ r/silhouettecutters
Really tried to push my limits on this one! 12x20 chrome vinyl.4yr ⋅ Murglewurms ⋅ r/silhouettecutters
Before vs after taking everyone's recommendations and swapping out my autoblade for a CB09 60° blade! I can't thank you guys enough for the help, saved my business's first 2021 release 😭3yr ⋅ graziieragazzii ⋅ r/silhouettecutters
Switched to Cameo 4 from Cricut Makers. So nice to have my sticker troubles behind me!2yr ⋅ himateo ⋅ r/silhouettecutters
Just got a CB09 Blade and I HIGHLY recommend it if you cut small text/details. Top sticker was cut using a silhouette premium blade depth 2, bottom was cut using the CB09 blade with the 60° blade2yr ⋅ FanWh0re ⋅ r/silhouettecutters
Little update on my stickers. Finally got the right colors, decided to stick with the simplest layout and curting a page with 2 sheets takes 6:20 Minutes.3yr ⋅ Brombeere ⋅ r/silhouettecutters
My first ever cameo project! Just a little test project! Any resources or advice welcome!3yr ⋅ Helpful-Penalty ⋅ r/silhouettecutters
Glitter isn’t easy, but is making really nice presents for nieces and nephews4yr ⋅ Njeff ⋅ r/silhouettecutters
does anyone where I can get sticker paper with a transparent backing like the photo shown? Pic cred: mins studio:) thanks for any help!2yr ⋅ manjubbies ⋅ r/silhouettecutters
Axolotl sticker sheet first draft. Critique and ideas welcome. More info in Post.3yr ⋅ Brombeere ⋅ r/silhouettecutters
Day 10 of 30. Spent most of yesterday redecorating my bathroom, so got to this pretty late. Really like this vinyl, very pretty!4yr ⋅ codenamefawkes ⋅ r/silhouettecutters
They say to use water and soap to clean the mat... well, everything came off and now I feel stupid.9mo ⋅ faralonglongwaytorun ⋅ r/silhouettecutters
Shirt I made for a friend, always get nervous doing sleeves but I think it turned out good.3yr ⋅ Chubbs117 ⋅ r/silhouettecutters
I'm getting better at editing. I removed the apple and inserted a coffee cup.4yr ⋅ sunniidisposition ⋅ r/silhouettecutters
I made these little tags with my cameo, and I love them 😍 thought I’d share!3yr ⋅ Whnthsungoesdwn1 ⋅ r/silhouettecutters
A pie dish for my sister with my mother's recipe in my mother's handwriting on it. We lost my mom in Jan 2015. Digitized the handwriting in adobe illustrator, made a vinyl stencil with the cameo 3, and used glass etching cream5yr ⋅ eldara_ember ⋅ r/silhouettecutters
Day 4 of 30.. started out as something completely different..but that went downhill fast, so I adjusted fire and came up with this..and I kinda love it4yr ⋅ codenamefawkes ⋅ r/silhouettecutters
Day 3 of 30.. This one was a pain to weed.. but I love it!!4yr ⋅ codenamefawkes ⋅ r/silhouettecutters
Made using cameo3 removable paint vinyl and spray paint . Anyone else paint with your cameo?3yr ⋅ TheBlackDuckHimself ⋅ r/silhouettecutters
New Silhouette Cameo 4 cuts consistently wrong using PixScan (More info in comments)1yr ⋅ Furview ⋅ r/silhouettecutters
Tips for using the graphtec blades on a 4? I'm still stunned 5 of these costs as much as 1 autoblade 🥴3yr ⋅ graziieragazzii ⋅ r/silhouettecutters
Decided to finally bite the bullet and give this thing a shot... and I couldn't be happier with the results so far!!!4yr ⋅ codenamefawkes ⋅ r/silhouettecutters
First experience with HTV went better than expected. Quite happy 😊3yr ⋅ christhewelder75 ⋅ r/silhouettecutters
Hi everyone, I see a lot of people having the same issue as me - bottom right side not cutting well in print and cut.. I tried fixing my registration marks - but STILL the right side will go off.. anyone fixed this issue? Or is the only option to move image away from cutting line :( ?2yr ⋅ mcdo2924 ⋅ r/silhouettecutters
Couple of shirts I made for the hubs. PacMan was pretty intense to weed, but totally worth it.4yr ⋅ willsewforfood ⋅ r/silhouettecutters
Day 5 of 30 made some cute camping car decals, simple but fun!4yr ⋅ codenamefawkes ⋅ r/silhouettecutters
Silhouette School has a code for 40% off software upgrades at Swing Design!2yr ⋅ hygienichydrangas ⋅ r/silhouettecutters
Does anybody know how to stop cutting in the middle or remove those lines? I insert my PNG> detach and delete lines> trace object> offset and then I delete the traced lines so I’m only left right the offset line1yr ⋅ ChickenNo6514 ⋅ r/silhouettecutters
I've only done 3 vinyl projects. My husband asked me to put this on the door of his new office. I was so so so scared. Now I can't stop staring at it.5yr ⋅ Moerow ⋅ r/silhouettecutters
Has anyone tried these aftermarket blades? I have a Portrait 2 that I’ve been using with the stock Autoblade. It’s time to replace it, and I was wondering if these blades are as good a deal as they appear.3yr ⋅ Wavefolded ⋅ r/silhouettecutters
My first set of shirts using HTV. Yeesh. I almost had a heart attack.5yr ⋅ Moerow ⋅ r/silhouettecutters
Why can’t my cameo cut stickers right?? It seems like every time I cut stickers it has an alignment problem. (I have looked at every YouTube video out there and have tried to calibrate it) I only use matte sticker paper, I have a cameo 4 using an auto blade.1yr ⋅ xxJuliannaxx ⋅ r/silhouettecutters
I got tired of having to hunt for paper to give people my information, so I made myself some business cards! They're a bit smaller than traditional cards, and I absolutely love them!4yr ⋅ TheLaynie ⋅ r/silhouettecutters
Anybody know why top half cuts fine and then the bottom half is completely off? I reset all my settings back to default and made sure nothing is inside the hash marks. I had more success when I didn't know what I was doing.2yr ⋅ Purpledaisy419 ⋅ r/silhouettecutters
Using a paper towel holder from Goodwill as a vinyl feeder...6yr ⋅ wolfwatcher81 ⋅ r/silhouettecutters
Colours from silhouette are so dull? Same settings and paper. Left is printed from photoshop. How do I remedy this?3yr ⋅ muh-liss ⋅ r/silhouettecutters
Thank you whoever posted these light ‘boxes’! I decided to give them a try. Used my silhouette and some lime green LED fairy lights. 👌🏼 great gift idea!4yr ⋅ kiki626 ⋅ r/silhouettecutters
i use the brand mats and line everything up, what am I doing wrong??1yr ⋅ mylittlevegan ⋅ r/silhouettecutters
I printed the registration marks incorrectly by mistake ( box in the wrong corner?? ) I’m not even sure why Silhouette Studio would allow you to print registration marks that your machine couldn’t even read. Is there a way to remedy this? 😭3yr ⋅ creamsicleclay ⋅ r/silhouettecutters
hello please help😅 I've tried a couple different vinyls with my autoblade on my portrait 3, and it's still SOO hard to weed. and it takes me forever.. cuts fine through cardstock, but not my vinyls... pic to show how messy it's made my craft😭 this autoblade is killing me🥲1yr ⋅ HiAssCutiePeaches ⋅ r/silhouettecutters
Really digging this cameleon htv. It changes colors based on the angle / lighting.4yr ⋅ applepie819 ⋅ r/silhouettecutters
I’m gonna cry. 10 hours of self troubleshooting and still my paper rips and cameo plus cuts 2 pixels to the left. I’m using 200gsm plain paper and can’t figure out why it can’t cut without white edges and cleanly. Any help?2yr ⋅ ProofIllustrious5075 ⋅ r/silhouettecutters
I can not for the life of me figure out how to calibrate my machine! Please help Ive also done the distance calibration and i just dont know what is wrong with it2yr ⋅ BearyCafeAndCo ⋅ r/silhouettecutters
Any idea why my registration marks are blue all of a sudden? They printed black 2 days ago. On vinyl they were light purple. If i print them allone they are black...3yr ⋅ Brombeere ⋅ r/silhouettecutters
print/cutOk, so. My cameo 4 is cutting worse and worse as it goes down the page. Is it because my offset is too small? I have literally tried EVERYTHING and it's making me crazy. Maybe I'm expecting too much.2yr ⋅ melaniek317 ⋅ r/silhouettecutters
Is this normal? i tried different settings but sometimes is not cutting as it should.2yr ⋅ Practical_Nebula9845 ⋅ r/silhouettecutters
I'm trying to cut EasySubli. Anyone know why this us happening? My test cut square has clean edges. I've tried swapping my blade and different settings.1yr ⋅ pupchilla57 ⋅ r/silhouettecutters
I used vinyl cut by my Silhouette Cameo as the stencil for my etching cream! I’m amazed at how well it worked. Perfect mugs for these crisp autumn mornings. :)6yr ⋅ bysabrinamarie ⋅ r/silhouettecutters
'No compatible auto action was found for this material' how on earth do you fix the software just forgetting every single cut setting?3yr ⋅ jep_miner1 ⋅ r/silhouettecutters
Looking for help AGAIN 😥 Top row the stickers are very misaligned and frayed while the bottom row cut out beautifully. The only difference between the two projects is the paper type and I made the blade cut a little harder. Has anyone run into this problem? Thanks for the help. I’m desperate3yr ⋅ creamsicleclay ⋅ r/silhouettecutters
I’m really confused about the workaround posts for these glitches when using a Mac. So do I have to reinstall a different version of the software?? I’m super new and confused. :( Any help is appreciated.3yr ⋅ nicolesaidwhoa ⋅ r/silhouettecutters
I’m trying to use the silhouette pens I just got and they aren’t working at all. I can use them to write so I know the pens work but once I send it this is what happens. I feel like I waste so much materials with this silhouette and am thinking of going to the cricut3yr ⋅ mamahoots22 ⋅ r/silhouettecutters
Help with stencil vinyl lifting out while cutting! Using oracle 813. New blade. What else can I do!2yr ⋅ Crafty_Kirch ⋅ r/silhouettecutters
Alignment issues with cameo 4? I've recalibrated the carriage several times and used compressed air to see if anything was caught underneath but it still continues. Running v 4.5.1551yr ⋅ octodogz ⋅ r/silhouettecutters
Day 6 of 30... was a failure.. I need to watch more videos on layering, cause I'm not that great at it. Also, I managed to get the outer ring stick to my cutting mat.. 🤯4yr ⋅ codenamefawkes ⋅ r/silhouettecutters
Love using my cutter to make stencils. Christmas gift for a friend5yr ⋅ lily-layne ⋅ r/silhouettecutters
Hi all I’m having issues with these little jagged bumpy edges when trying to cut my laminated vinyl stickers. I’m new to this material. Any advice on how to fix this would be greatly appreciated.3yr ⋅ vickitluna ⋅ r/silhouettecutters
my machine won't cut all the way through vinyl, top and bottom are force 12/16 and blade depth 2/3 middle is blade depth 4, using the autoblade cab anyone help please1yr ⋅ Usual_Chapter_2051 ⋅ r/silhouettecutters
Silhouette Cameo 3 not fully cutting letters, it does fine with larger stuff, what can I do to get more complete cuts?2yr ⋅ nocturne213 ⋅ r/silhouettecutters
how do I get rid of the red lines around the party hat templates? I’m new to this1yr ⋅ kjlovesthebay ⋅ r/silhouettecutters
First timer making some mugs for a friend. Learned a lot already!5yr ⋅ StupidFlounders ⋅ r/silhouettecutters
Print Preview is completely wrong and ignoring crop? Help needed, TYSM!2yr ⋅ Pikaskye ⋅ r/silhouettecutters
Silhouette portrait 2 has shifted cuts? I tried calibrating it so it's correct bc it was very slightly off and now the cuts look even worse 🤦🏼♀️ I use to have this problem w/ my portrait 1 which was due to slippage but this cutting mat is very sticky. Anyone have any ideas? :(4yr ⋅ maryberrystudio ⋅ r/silhouettecutters
I teach a technology class and we use silhouette. One assignment is to create something that represents yourself!6yr ⋅ eddiethesecond ⋅ r/silhouettecutters
Help with trace? App to use? I have design edition if there is already a tool.2yr ⋅ hollisann79 ⋅ r/silhouettecutters
I need to cut the outline of this printable heat transfer sheet. Page is 11” x 17”, actual image roughly is 10” x 13.5”. My Cricut only cuts images up 9.25” x 6.75”. Are any Silhouette models available to cut that size and or bigger? Please help. Thank you.2yr ⋅ a_mira_1986 ⋅ r/silhouettecutters
Red lines appear right when i add an image and i cant remove it without deleting the whole image2yr ⋅ BearyCafeAndCo ⋅ r/silhouettecutters
Got a new Silhouette 4. Cutting the same image repeatedly and it works fine on the first line, but a small part on each (the tail here) isn't cutting properly on second line. It's not just this image - other files are doing the same that cut ok on my previous Silhouette. How can I fix this please?2yr ⋅ Sparklybelle ⋅ r/silhouettecutters
Getting ready to take the little one camping. I'm hoping I got the placement of the HTV right. I'll find out when he comes over Monday.4yr ⋅ sunniidisposition ⋅ r/silhouettecutters
